Basic Composition Of Injection Mold

1. Pouring system: The channel through which the molten material flows from the nozzle of the injection machine into the cavity, including the main flow channel, the runner channel, the gate, the cold slug well, the draw rod, etc.

2. Molded parts: parts of molded plastic parts, such as cores, cavities and other auxiliary parts.

3. Temperature control system: used to adjust the temperature of the mold.

4. Plastic parts ejection system: including side parting mechanism, secondary ejection mechanism, first reset mechanism and fixed distance parting mechanism.

5. Installation part: the part where the mold body is reliably installed on the injection machine.

6. Connection system: the connection system that combines the various structural parts into a whole.

7. Guiding system: to ensure the accuracy of the movement of each structural member, such as guide posts, guide chutes, etc.